We manufacture Neoprene Hoses which are widely demanded in various industries. These hoses uses a special, high quality ether-polyurethane instead of the ester-polyurethane frequently used for commercial applications. Various Neoprene hoses include: AIRDUC PUR 351 EL -40 °C to +90 °C PUR <10³ O, light, smooth interior, robust and abrasion-proof, capable of electrostatic discharge CP PTFE/HYPALON-VA 472 EL -40 °C to +170 °C TEFLON < 106 O super-light and compressible, highly chemical resistant, capable of electrostatic discharge (to +170 °C) CP PTFE/Glass-VA 471 EL -150 °C to +250 °C TEFLON < 106 O super-light and compressible, highly chemical resistant, capable of electro-static discharge (to +250 °C)

Applications:

• Suction and blast hose, especially suitable:
• For powdery solids such as dust, powder and fibres
• For gaseous media such as vapors and smoke
• For steam extraction
• As conductor of hot and cold air
• For blowers and compressors

We manufacture Silicon Hoses which are flexible and fibre reinforced. These hoses have small bending radius and are also kink proof. Double layered these hoses are heat resistant and also leak proof. These hoses are suitable for hot and cold air, for granule dryers in the plastic industry, for blowers and compressors, for exhaust gas technique and engine construction and military construction.

Features:

• Spring steel wire integrated in wall
• Fabric-reinforced tape
• Cord as reinforcement

Pvc Coated Polyester Fabric Hose With Spring Steel Wire Enforcement Bellow Type/ Plain Type:

Application:

• Light delivery lines of dust collection, welding fumes especially for places where super flexiblity is required. Mostly preferred as a viable alternative to china Bale plucker in textile industry.

Temperature:

• + 0° C to 100° C
• Range 50 mm ID to 300 mm ID

This hose is highly flexible and abrasion proof. With high tensile strength and tear resistance they have optimized flow properties. Microbe and hydrolysis resistant they also have good resistance to mineral oils and chemicals. With low temperature flexibility they also have small bending radius. They are kink proof and gas and liquid tight. Our flexible hoses include: CP PE 457 -35 °C to +80 °C PE. Super-light and compressible, Ø to 1,000 mm CP PTFE/Glas-VA 471 -150 °C to +250 °C TEFLON with double-layer. Super-light and compressible, Ø to 1,000 mm (to +250 °C) AIRDUC PE 362 F -35 °C to +80 °C PE, medium-heavy with smooth interior

Applications:

• Suction and blast hose, especially suitable:
• for solids such as dust, powder and fibres
• for gaseous media such as vapors and smoke
• for de-dusting and suction plants, flue gas extraction, blast furnace exhaust and welding gas exhaust
• for exhaust gas technique, engine construction, engine warming, aircraft construction and military construction
• as bellows and compensator